Evonik Vestamid E40-S3 PA12 Granule Virgin Polyamide Resin IN STOCK PA12 Elastomer
Evonik Vestamid E40-S3 PA12 Granule Virgin Polyamide Resin IN STOCK PA12 Elastomer: Evonik Vestamid E40-S3 PA12 Granule Virgin Polyamide Resin IN STOCK
| Brand |
EVONIK |
|---|
Evonik Vestamid E40-S3 PA12 Granule Virgin Polyamide Resin IN STOCK PA12 Elastomer is covered in this guide with a practical overview of properties, applications, and material selection points relevant to Evonik Vestamid E40.
Key attributes
Other attributes
Packaging and delivery
Few bags packing on cartons
Large quantity packing on plastic tray
VESTAMID X7070
VESTAMID X7166
VESTAMID X7167
VESTAMID X7229
VESTAMID X7293
VESTAMID L-GF50
VESTAMID L1670
VESTAMID L1723
VESTAMID L1833
VESTAMID L1930
VESTAMID L1940
VESTAMID L1950
VESTAMID L2121
VESTAMID L2123
VESTAMID L2124
VESTAMID L2140
VESTAMID L2141
VESTAMID L2170
VESTAMID L-GB30/LGB30
VESTAMID L-GF15
VESTAMID L-GF30
VESTAMID L-R2-GF25
VESTAMID LR3EI
VESTAMID L-R3-MHI
VESTAMID L-R7-MHI
VESTAMID LX9001
VESTAMID LX9112
VESTAMID LX9117
VESTAMID LX9123
VESTAMID NRG 1001
VESTAMID NRG 1902
MedicalGrade..HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310
PEI+10% Glass fiber filled, SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R
PEI+20% Glass fiber filled, SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R
PEI+30% Glass fiber filled, SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR
PEI+40% Glass fiber filled, SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR
PEI+45% Glass fiber and mineral filled, SABIC ULTEM 3452
PEI+PTFE filled, SABIC ULTEM 4000/4001/4002/4211
PEI Transparent MD130/131/131A/147
PEI PW 1000/2100/2200/2210/2300/2400
PEI JD 7903/7904
PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311
PEI AUT195/195M/200/200M/210/230
PEI AR9100/9110/9200/9300
PEI ATX200/200F/200R/3562R
VESTAMID® E – POLYETHERBLOCKAMIDE PEBA
* low density
* good resistance to chemicals and solvents
* ease of processing, coloring, and overmolding
* very easily decorated by heat transfer printing
* excellent low-temperature impact strength
* hardness and flexibility can be varied over wide ranges
* high elasticity and good resilience
* only slight temperature dependence of mechanical properties
* free from volatile or leaching plasticizers
VESTAMID® E compounds are suitable for precision injection moldings, such as noiseless gears and functional elements of sports shoes, as well as for high-performance extrusion components like paint spray hoses, vacuum brake booster lines, and high-quality decorative films. We can provide you with unstabilized or heat- and light-stabilized material, according to your requirements. Transparent and high-gloss molding compounds are also available.
VESTAMID® L – POLYAMIDE 12
The properties of semicrystalline polyamides are determined by the concentration of amide groups in the macromolecule. This is lower in PA 12 than in all other commercially available polyamides, which accounts for its special properties:
* Minimal water absorption: molded parts show almost no dimensional changes with variation in atmospheric humidity.
* Extraordinarily high impact resistance and Charpy notched impact strength, even well below freezing point
* Good to excellent resistance to greases, oils, fuels, hydraulic fluids, and many solvents as well as to salt solutions and
other chemicals
* Excellent resistance to stress cracking, even for metal parts encapsulated by injection molding or embedded into the plastic
* Excellent abrasion resistance
* Low dry sliding friction coefficient as compared with steel, polybutylene terephthalate, polyacetal, and other materials
* Noise and vibration damping properties
* Excellent resistance to fatigue caused by frequent load change
* Easy processability
Thanks to these properties, the applications of VESTAMID® L range from sophisticated line systems for motor vehicles, through large-volume pipes as are used in crude oil production, core insulation in the cable industry, and catheters in medical technology, to precision injection-molded parts like impellers and control-valve housings in machine and equipment manufacture.
Delivery method：
By Express 1KG-100KG
By Air 100KG-500KG
By Sea >500KG
By Express(FEDEX, UPS, DHL, TNT, EMS, etc...)
Advantage: Fast ( takes about 7 -10 days in the delivery )by door to door service ---Disadvantage: expensive By Air Transportation
Advantage: Fast ( takes about 8 - 12 days ) and cheaper than Express. ---Disadvantage: Customer need to take the goods from the airport. By Sea( Ocean ) Transportation
Advantage: Much cheaper than Express or Air transportation.
Disadvantage: Slow and customer need to take the goods from the destination port.
