Solvay Udel PSU P-1700 CL2611/BK937/WH6417/WH7407 Polysulfone Resin Udel P-1700 Series Food/Medical Application
Solvay Udel PSU P-1700 CL2611/BK937/WH6417/WH7407 Polysulfone Resin Udel P-1700 Series Food/Medical Application: Solvay Udel PSU P-1700
| Brand |
Solvay |
|---|
Solvay Udel PSU P-1700 CL2611/BK937/WH6417/WH7407 Polysulfone Resin Udel P-1700 Series Food/Medical Application is covered in this guide with a practical overview of properties, applications, and material selection points relevant to Solvay Udel PSU P.
Key attributes
Other attributes
Packaging and delivery
Udel P-1700 HC
Udel P-1700 CL 2611
Udel P-1700 NT 06
Udel P-1700 NT 11
Udel P-1700 NT 15
Udel P-1700 BK 937
Udel P-1700 WH 6417
Udel P-1700 WH 7407
Udel P-1700 NT LCD
Udel P-1710
Udel P- 1710 NT 15
Udel P-1720
Udel P-3700 HC
Udel P-3500 NT11 / Udel P-3500 NT11 / Udel P-3500 NT LCD
Udel GF-120 NT 20
Udel GF-120 BK 937
Udel GF-120 GY 1234
Udel GF-110 NT LE
Udel GF-110 BK 937
Udel GF-110 GY 8057
Udel GF-130 NT
Udel GF-130 BK 937
Udel® PSU (polysulfone) is a rigid, high-strength, semi-tough, transparent plastic that offers higher heat resistance and better hydrolytic stability than polycarbonate. It retains its good mechanical properties when exposed to steam and other sterilization techniques.
Udel® PSU polymers are particularly well suited for the fabrication of porous hollow fiber and flat sheet membranes using a solvent-based process. These high molecular weight polymers are used in a variety of membrane filtration applications, such as renal dialysis, water treatment, bio-processing, food and beverage processing, and industrial gas separation.
*Excellent thermal stability
*Well suited for the fabrication of hollow fiber and flat sheet membranes
*Stability at pH levels from 2-13
*Excellent resistance to caustic and good resistance to chlorine
*Low levels of extractible and insoluble materials
*May be sterilized using steam, ethylene oxide, and e-beam radiation
*High toughness and strength
*Good environmental stress cracking resistance
*High heat deflection temperature, 174°C (345°F)
*Combustion resistance
*Transparency
*Approved for food contact and potable water
*Low creep
Udel P-1700 CL2611 polysulfone (PSU) is a tough, rigid, high-strength thermoplastics suitable for continuous use up to 300°F (149°C). It is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone is highly resistant to mineral acids, alkali and salt solutions. Resistance to detergents and hydrocarbon oils is good, but the resin may be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons.
These resins are also highly resistant to degradation by gamma or electron beam radiation. Electrical properties of Udel® P-1700 polysulfones are stable over a wide temperature range and after immersion in water or exposure to high humidity.
The resins comply with CFR 177.1655 and may be used in articles intended for repeated use in contact with foods. Additionally, they are approved by the NSF, by the Department of Agriculture for contact with meat and poultry and by the 3-A Sanitary Standards of the Dairy Association.
* Transparent: Udel® P-1700 CL 2611 CMP
* Transparent: Udel® P-1700 NT 06
* Transparent: Udel® P-1700 NT 11
* Opaque Black : Udel® P-1700 BK 937
* Opaque White: Udel® P-1700 WH 6417
* Opaque White: Udel® P-1700 WH 7407
Delivery method：
By Express 1KG-100KG
By Air 100KG-500KG
By Sea >500KG
By Express(FEDEX, UPS, DHL, TNT, EMS, etc...)
Advantage: Fast ( takes about 7 -10 days in the delivery )by door to door service ---Disadvantage: expensive By Air Transportation
Advantage: Fast ( takes about 8 - 12 days ) and cheaper than Express. ---Disadvantage: Customer need to take the goods from the airport. By Sea( Ocean ) Transportation
Advantage: Much cheaper than Express or Air transportation.
Disadvantage: Slow and customer need to take the goods from the destination port.
